DCS RDT-366SS Guía de instalación descargar pdf (Pagina 8)

UNPACKING AND HANDLING

After checking the countertops for level and

before sliding the range into place, measure the

distance from the floor to the top of the counter

work surface in the rear left and right corners.

Adjust the corresponding rear corner of the range

to an equal height of the counter, as the rear

leveling legs are not accessible once the range is

pushed into place. Once the range is in place, the

front leg levelers can be accessed to level the

front of the range. Replace the kick panel and

oven doors by reversing the procedure described

previously. It is important that the two screws

retaining the kick panel are secure to prevent

accidental access to live electrical components

and wires (fig. 1 pg. 5).

GRIDDLE AND GRILL LEVEL ADJUSTMENTS

The grill and griddle sections (if equipped) are

fastened in place at the front with screws. They

are designed to be stationary and not meant to

be removed for cleaning. The griddle has two

leveling screws beneath the rear flue cover which

can be used to adjust the griddle to the desired

slope. To access the leveling adjustment screws,

remove the griddle flue cover by lifting upwards.

The center screw is for shipping and should be

removed.

DOOR HINGE ROLLER

LOCK

(CLOSE)

UN-LOCK

Fig. 4

Fig. 5

Shipping Screw

(remove)

Outer Leveling

Screws (2)

Griddle Flue

Cover

Door Hinge Roller

Lock

(close)

UnLock

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Comentarios a estos manuales

Sin comentarios

DCS RDT-366SS Guía de instalación Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Cocinas DCS RDT-366SS