Dcs CS-364GL Manual de usuario descargar pdf (Pagina 10)

STEP 3: (CONTINUED)

6) Cut the openings for the following installation:

 Standard counter top installation, see Fig. 5A

 Deep counter or island installation, see Fig. 5B

NOTE: If the deck is used, the sides or bottom of

the cutout may be solid combustible or

non-combustible material. If the bottom

is solid, provide a 6" x 6" cutout in the

left rear corner for the gas inlet and

power cord clearance.

CABINET PREPARATION

Flush with cabinets

Front projects outward as shown

from standard depth cabinet.

Front flush with cabinets; a minimum

of 25

3/4" cabinet depth required

Fig. 2

Front flush with cabinets; a minimum of

25 3/4” cabinet depth required

Front projects outward as shown

from standard depth cabinet.

Flush with cabinets

Counter-Sunk Screws

Fig. 3

Counter-Sunk Screws

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Sin comentarios

Dcs CS-364GL Manual de usuario Pagina 10