DCS BGS-1230 Manual de instalación descargar pdf (Pagina 6)

CABINET PREPARATION

STEP 2: CABINET PREPARATION

1. The range is a free standing unit. If the unit is to be placed adjacent to cabinets,the clearances

shown in Fig. 3 are required. The same clearances apply to island installations .

2. The range can be placed in various positions with respect to the cabinet front, with the front

either flush or projecting, depending on the countertop depth (See Fig. 5, page 6).

min. 30" wide hood

CAUTION:

36" min. to

combustible

material ,

from cooking

surface

electrical + gas

supply

35-3/8" max. for level counter,

36-3/4" max. with range

leveling legs fully extended

12" min. to combustible

material , each side

cooking surface



As defined in the

“National Fuel Gas Code”

(ANSI Z223.1, latest edition).

The range height is adjustable. The level of the

range top must be at the same level or above the countertop level.

7-1/2"

18" min.

13" max.

4-1/2" (gas)

11" (electrical)

Flex Line

to Range

2" Maximum

Protrusion from Wall

for Gas Supply

FIG. 4

FIG. 3

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Sin comentarios

DCS BGS-1230 Manual de instalación Pagina 6